View HX10-P_198502.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Current Transducer HX 03 .. 50-P
For the electronic measurement of currents: DC, AC, pulsed, mixed, with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit).
IPN =
3 .. 50 A
Electrical data
Primary nominal r.m.s. current IPN (A) 3 5 10 15 20 25 50 Primary current measuring range IP (A) 9 15 30 45 60 75 150 Primary Conductor Diameter x Turns (mm) 0.6d x 20T 0.8d x 12T 1.1d x 6T 1.4d x 4T 1.6d x 3T 1.6d x 2T 1.2 x 6.3 x 1T Type
Features
HX 03-P HX 05-P HX 10-P HX 15-P HX 20-P HX 25-P HX 50-P
* Galvanic isolation between primary * * * * * *
and secondary circuit Hall effect measuring principle Isolation voltage 3000V Low power consumption Extended measuring range(3x IPN) Power supply from 12V to 15V Material according to UL94-V0
VOUT ROUT RL VC IC Vd Ve
Output voltage @ IPN, RL = 10 k, TA = 25C 4 Output impedance < 50 Load resistance 10 Supply voltage ( 5 %)1) 15 Current consumption < 15 R.m.s. voltage for AC isolation test, 50/60Hz, 1 mn > 3 R.m.s. voltage for partial discharge extinction at 10pC 1 Impulse withstand voltage, 1.2/50s 6
V k V mA kV kV kV
Advantages
* Low insertion losses * Easy to mount with automatic
handling system
Accuracy-Dynamic performance data
* Small size and space saving * Only one design for wide current
ratings range
X
L
VOE VOH VOT TCG tr f
Accuracy @ IPN, TA = 25C (without offset) Linearity (0 .. IPN) Electrical offset voltage, TA = 25C Hysteresis offset voltage @ IP = 0; after an excursion of 3 x IPN Thermal drift of VOE Thermal drift of the gain (% of reading) Response time @ 90% of IP Frequency bandwidth (-3 dB) 2)
<1 <1 < 40 < 15 max. 1.5 0.1 3 50
% of IPN % of IPN mV mV mV/K %/K s kHz
* High immunity to external
interference.
Applications
* Switched Mode Power Supplies
(SMPS)
* AC variable speed drives * Uninterruptible Power Supplies
(UPS)
General data
TA TS m Ambient operating temperature Ambient storage temperature Mass Min. internal creepage distance/clearance Isolation material group Standards - 25 .. + 85 C - 25 .. + 85 C 8 g 5.5 mm I EN50178
* Electrical appliances * Battery supplied applications * DC motor drives
Notes :1) Also operate at 12V power supplies, measuring range reduced to 2.5x IPN 2) Small signal only to avoid excessive heating of the magnetic cores
030806/5 www.lem.com
LEM Components
HX 03 .. 50-P (in mm)
HX 03...25-P
19 Max.
HX 50-P
19 Max.
20 Max.
0.5
3.5
3.5
3.5
0.5 3 8.8 5.4 4 OUT 3-P=2.54 15.4 Max. 3 +V 20 1 -V or 0 1.3 1.2 3 8.8 5.4 5 6 6 5 15.4 Max. 4.5
3
10.85 d
4 OUT 3.5 3-P=2.54 3 +V 20 1 -V or 0
6
0
3 10.85
Top view
3.5
5
HX 05-P 41123
Terminal Pin Identification 1.....-15V 2.....0V 3.....+15V 4.....Output 5.....Primary input Current(+) 6.....Primary input Current(-)
Lot No. Primary conductor diameter / dimension
HX 03-P 05-P 10-P 15-P 20-P 25-P 50-P d 0.6 0.8 1.1 1.4 1.6 1.6 1.2x6.3
Secondary pins dimension 0.5x0.25
Specifications subject to change without notice.
3
20 Max.

▲Up To Search▲

Price & Availability of HX10-P

	To Download HX10-P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .